Services

Our Service 1

Aliquet proin venenatis eget nec, quisque proin euismod duis nibh ullamcorper nunc suspendisse ipsum bibendum.

Our Service 2

Lectus nullam diam posuere tincidunt nam morbi leo scelerisque nulla imperdiet dictum ac fermentum urna.

Our Service 3

Neque ac eget habitasse nisl facilisis nunc vel dolor adipiscing id in posuere at at placerat.

ABC powders are fire fighting dry chemical powders for use against fires in fibrous materials such as paper, wood and textiles (Class A) as well as fires in flammable liquids (Class B) and flammable gases (Class C). ABC powders are mixes of finely ground solid chemicals i.e. ammonium sulphate and the active ingredient monoammonium phosphate (MAP)
ABC Dry Powder fire extinguishers are ideal for general offices, homes, vehicles, caravans, boats and electrical plants. Extremely effective on electrical hazards, flammable liquids and gases.

HFC227ea Clean Chemical Fire Suppression Agent is commonly called FM 200
FM200 is a synthetic/chemical fire suppression gas and extinguishes a fire by removing the free radicals or heat elements from the fire triangle (Oxygen, Heat and Fuel).
It leaves no residue, is non-conductive and can be used in class A fires, electrical, wood, paper and fabric and class B fires, flammable liquids.
FM200 system works to extinguish a fire within 10 seconds by depriving the fire of heat and interrupting the chemical reaction that leads to combustion and stringently tested and approved by United Laboratories Inc (UL), FM Global Group, VdS Schadenverhütung and Tenaga NasionalBerhad, our SR-200 systems are designed to be space efficient, while still providing a wide area of coverage and our experience in testing and commissioning these FM-200 systems extends through a wide range of structures and industries from government agencies, to 5 star resorts, transport hubs, medical centres and major shopping malls.

FK-5-1-12 system extinguishes a fire quickly and making it the ideal system to safeguard business continuity and protect sensitive material.
FK-5-1-12 are fire protection fluid and discharged as a gas but as its boiling point is 50 deg C the nozzle is designed to help it vaporise. It leaves no residue and is nonconductive. It can be used in class A fires, electrical, wood, paper and fabric and class B flammable liquids.
FK-5-1-12 has an Ozone Depletion Potential of 0 and a Global Warming Potential of 1 equal to that of CO2 and has an Atmospheric Lifespan of just 5 days or less. Although not as environmentally friendly as inert gases, FK-5-1-12 is the best of the clean chemical agents so does offer a good alternative where a client’s policy dictates a greener solution. without any damage to sensitive electronics and it leaves no residue, making it the ideal system to safeguard business continuity and protect sensitive material.

Inert Gas Fire Suppression Agent is a standard mix of two inert gases Nitrogen and Argon. Both gases occur naturally in the atmosphere and are therefore the ultimate in an environmentally safe fire suppression product that is also safe for people. They have a Global Warming Potential and Ozone Depleting Potential of zero and does not decompose on application to a flaming fire.
These gases work by lowering the normal oxygen concentration in the surrounding air from 21% to 12%, thus depriving the fire of its fuel but still providing a safe and breathable environment.

CO2 Fire Suppression has been used on print machines, rotating machinery, electrical cabinets, transformers and flow solder machines to name just a few, due to its flexibility of design
CO2 is stored as a liquid under it’s own vapour pressure and when exposed to air will expand to about 0.52m3 of gas per 1Kg of liquid at 10deg C. It is 1.5 times as dense as air. It is colourless, odourless and electrically nonconductive.
CO2 is heavier than air care and must be taken in areas such as pits or floor voids as it will accumulate in these areas. The standard design concentration is 34% by volume which is then multiplied by a volume factor and then material conversion factor to ensure correct levels of concentration. It can be used on class A fires, wood, paper & fabric class B fires, flammable liquids and class E fires, electrical.
The hold or retention time is 20 minutes twice that of inert gas and clean chemical agents, although this may have to be extended to allow for the burning material to cool.

REGISTER TODAY

Contact Us Today

Sollicitudin eros nulla mus donec a quisque convallis integer condimentum volutpat felis sed aliquet netus dolor dictumst pellentesque egestas varius magna senectus.